What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 11:29

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
He then describes the function of a fuse.
What's a band that is really popular that you don't like? Why?
He then describes Rainy Season and Lightning.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–10[John johnson John Johnson ]
One is “what exactly is in a ‘surge protector’ ? ”
Because the load is inductive, the current lags the voltage.(by a bit).
What is lightning?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The third is lightning and “how it gets conducted into a home.”
This is where this question deviates from being a 'generic' question, and becomes more specific.
This one hit behind the barn.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
but this device (an Inductor) … impedes the rapid changes in the current.
Do girls ever miss their first love?
The bolt then partially travels down the line to your home.
2024–10–16 [ OO OLAOYE OYEBODE ]
An AC voltage/ current source, and an ac inductive load.
Barnstars:
Upvotes:
In schematic diagrams this is the symbol for a fuse:
I post the exact comment here.
Here is a simplified AC power diagram.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
[image of Common-mode choke]
Why do I sweat so much after applying moisture or sun screen on my face? I have normal skin.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Now when you have a certain ac resistance, then a current flows in a loop.
This device then solves the entire problem.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
These devices are installed between the “hot” and “neutral” and protective ground.
For this case there are devices called Metal oxide varistors (MOV).
Are there any queer Space Marine Legion in Warhammer 30k or 40k?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is 'the assistant's answer'
Fighters react to Kamaru Usman's rebound win vs. Joaquin Buckley at UFC on ESPN 69 - MMA Junkie
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
(Dc diagram shown, AC is similar).
How many boxes 600 x 400 x 200 go into a 20ft container?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Edit 2024–10.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–14 [Omar Gharbi Omar Gharbi ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But it can get overloaded, and no longer works.
There are three different concepts here that are getting confused.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
The other is “what does a “fuse” do?”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
nine
what exactly is a ‘surge’ protector?
He then asserts :
It also is a device that limits the change in current flow.
so, what happens?
a photo is worth a thousand words.
eight
A fuse is a non-resetable over current circuit protector.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
the problem then depends on "how fast does the fuse operate?".
A circuit breaker is similar, but is resettable.
First Sentence:
What does a fuse do?
This is where the MOV conducts again, and dissipated the energy.
At least they know the answer if they wanted it.
At one ohm, the resistor has a maximum of 1 watt power.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
So, the voltage could go up to 500 volts, and the fuse will not open up.
But… the neutral is now “floating” because of the 1 ohm resistance.
It seems Mohan does not understand the difference between a comment and an Answer.
but I think this circuit , shows a few more pieces.
These are simplified answers to the original question, and does not change anything I wrote above.
There are two important concepts here.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
[old diagram got deleted by accident]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.